Optimization of Adsorption of Eugenol-Silica Gel Composites to Metal Ions Cu (II) Using Box Behnken Method

Fitra Rachmalia, Muhammad Fathurrahman, Sutanto Sutanto

Abstract


Silica gel can be used as an absorbent so that it can also be used as a process for making eugenol-silica gel composites. This study aims to optimize the adsorption of the eugenol-silica gel composite to Cu (II) metal ions and to determine the maximum absorption capacity and adsorption constant of the Langmuir and Freundlich isotherm model. This research begins with determining the optimization of contact time 10-60 minutes, temperature 20-45 oC and the weight of the adsorbent is carried out in the range of 0.10-0.20 grams in a 50 mL solution and the experimental design of the box Behnken method will determine three variables through (Response Surface Methodology). Furthermore, the determination of Cu levels by preparing 100 ppm Cu mother liquor, making a standard series, and testing with Atomic Absorption Spectroscopy (AAS), and then determination of Langmuir and Freundlich adsorption isotherms. The results showed that the optimum conditions for the adsorption process using Response Surface Methodology (RSM) were at a contact time of 30 minutes, a temperature of 45 oC with an adsorbent weight of 0.10 grams in a 50 mL solution, in Langmuir and Freundlich isothermal adsorption. The adsorption process takes place in two directions (reversible) the values of Kf, b and n are 8331; -5.2224 and -0.4541. The adsorption process takes place in two directions (reversible) the values of Kf, b and n are 8331; -5.2224 and -0.4541. The adsorption process takes place in two directions (reversible) the values of Kf, b and n are 8331; -5.2224 and -0.4541.


Keywords


Isothermal Adsorption; Eugenol-Silica Gel; Response Surface Methodology

References


Harun, NH, Tuah PM, Markom MZ, Yusof MY2008. Distribution Of Heavy Metals In Monochoria hastata and Eichornia crassipes In Natural Habitats. Environmental Science Program School of Science and Technology, University of Malaysia.

Wu, Y., Zhang, L., Gao, C., Ma, J., Ma, X., and Han, R., 2009. Adsorption of Copper Ions and Methylene Blue in a Single and Binary System on Wheat Straw. Journal of Chemical & Engineering Data 54, 3229323.

Lee, JY, Chen, CH, Cheng, S., and Li, HY, 2015. Adsorption of Pb(II) and Cu(II) Metal Ions on Functionalized Large-Pore Mesoporous Silica. International Journal of Environment Science Technology 13(1), 1-12..

Hossain, MA, Ngo, H. Hao, WS Guo and Nguyen, TV. 2012. Removal of Copper from Water by Adsorption onto Banana Peel as Bioadsorbent. Int. J. of GEOMATE, Vol. 2, No. 2 (SI. No. 40, pp. 227-234

Wuryanti and Suharyadi. 2016. Metal Adsorption Study of Co(II), Cu(II), and Ni(II) in Artificial Liquid Waste Using Nanoparticle Adsorbent Magnetic Fe3O4 and ZnFe2O4. Jurnal Fisika Indonesia, Vol. 20 No. 2 p.28-35.

Fathurrahman, M., Sugita, P. and Purwaningsih, H., 2017. Synthesis and Characterization of Glutar Aldehyde Crosslinked Chitosan as an Adsorbent for Purifying Fragrance Oil. Journal of Chemistry and Education (EduChemia), 2, 1: 109-113.

Fathurrahman, M., Suhendar, U., Iryani, A., Widiastuti, D., Ahmad, SN, Juniar, E. 2022. Synthesis and Characterization of Eugenol-Silica Gel Composite from Corn Cob Ash and Analysis of Antibacterial and Absorbability to Water . Alchemy Journal of Chemical Research. 18(1): 10-18.

Handayani, M. & Sulistiyono, E., 2009. Langmuir and Freundlinch Equation Test on the Absorption of Chrom (VI) Waste by Zeolite. Bandung, PTNBR BATAN Bandung, pp. 130-136.

Hendrawan, Y., Susilo. B., Putranto, AW, Riza, DF Al, Maharani, DM, Amri, MN, 2016. Optimization with RSM-CCD Algorithm on Waterjet Vacuum Evaporator with Fuzzy Temperature Control in Milk Candy Making. Journal of Agritech, 36 (02), 226.

Prabudi, M., Nurtama. B., Purnomo, EH, Magister, S., Technology, P., Postgraduate, S., Agriculture, FT, 2018. Application of response surface methodology (RSM) with historical data on optimization of burger production processes. Journal of Food Quality, 5(2), 109-115.

Nurmiah, S., Syarief, R., Sukarno, S., Warinangin, R., Nurmata, B., 2013. Application of Response Surface Methodology in Optimizing Conditions for Processing Alkali Treated Cottonii (ATC). Journal of Postharvest and Marine and Fisheries Biotechnology, 8(1), 9.

Oon, LL, Nazaruddin, R., & Musa, A. 2012. Cadmium (II) Biosorption onto Seaweed (Kappaphycus alvarezii and Eucheuma denticulate) Waste Biomass: Equilibrium and Mechanism Studies. Middle-East Journal of Scientific Research.

Delle, AS 2001. Factors affecting the sorption of organic compounds in natural sorbent/water systems and sorption coefficients for selected pollutants. Journal of Physical and Chemical.


Full Text: PDF

DOI: 10.33751/helium.v2i1.5483 Abstract views : 156 views : 135

Refbacks

  • There are currently no refbacks.